Dual-phase rare-earth-zirconate high-entropy ceramics with glass-like thermal conductivity

A series of rare earth zirconates (RE₂Zr₂O₇) high-entropy ceramics with single- and dual-phase structure were prepared. Compared with La₂Zr₂O₇ and Yb₂Zr₂O₇, the smaller “rattling” ions (Yb³⁺, Er³⁺, Y³⁺) have been incorporated into pyrochlore lattice in (La_0.2Nd_0.2Y_0.2Er_0.2Yb_0.2)₂Zr₂O₇ (LNYEY) while larger ions (La³⁺, Nd³⁺, Sm³⁺, Eu³⁺) incorporated into fluorite lattice in (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂Zr₂O₇ (LNSGY). Due to high-entropy lattice distortion and resonant scattering derived from smaller ions Yb³⁺, Er³⁺, and Y³⁺, LNYEY shows a lower glass-like thermal conductivity (1.62-1.59 W m^-1 K^-1, 100-600℃) than LNSGY (1.74-1.75 W m^-1 K^-1, 100-600℃). Moreover, LNYEY and LNSGY exhibit enhanced Vickers’ hardness (LNYEY, H_v = 11.47 ± 0.41 GPa; LNSGY, H_v = 10.96 ± 0.26 GPa) and thermal expansion coefficients (LNYEY, 10.45 × 10^-6 K^-1, 1000℃; LNSGY, 11.02 × 10^-6 K^-1, 1000℃). These results indicate that dual-phase rare-earth-zirconate high-entropy ceramics could be desirable for thermal barrier coatings.     

Behavior of sulfate in preparation of single light rare earth carbonate by Mg(HCO_3)_2 precipitation method

The precipitation of the water-leaching solution of Baotou mixed rare earth(RE) concentrate roasted with sulfuric acid using ammonium bicarbonate for producing RE carbonate produces a mass of ammonia-nitrogen wastewater because of the relatively low solubility of rare earth sulfate.To solve the serious problem of ammonia-nitrogen pollution,new precipitators need to be developed urgently so as to meet the requirements of environmental protection and impurities content of the product(SO_4~(2-)1.8 wt% in RE carbonates products).In this paper,we studied the effects of feeding modes on the behavior of SO_4~(2-) during the preparation of light RE carbonate(RE=La,Ce,Pr,Nd) from their sulfate solutions using Mg(HCO_3)_2 as a precipitant.The results indicate that the contents of SO_4~(2+) in the La and Ce precipitates using positive feeding mode exceed 16 wt% because of the formation of La2(CO_3)_(2.15)(-SO_4)_(0.85)·4 H_2 O and Ce2(CO_3)_(2.15)(SO_4)_(0.85)·3 H_2 O,while those of the Pr and Nd precipitates are 4 wt%-5 wt%since they exist in the form of n-carbonate.The precipitates prepared using synchronous feeding mode are all RE carbonate with only 4 wt%-5 wt% of SO_4~(2-) enclosed in the precipitation.The content of SO_4~(2-) in the RE carbonate obtained using reverse feeding mode is the lowest.Among them,the content of SO_4~(2-) in La precipitate is only 1.40 wt%.Both synchronous and reverse feeding modes can effectively reduce the content of SO_4~(2-)in RE carbonate,which provides theoretical guidance for the preparation of qualified light RE carbonate products by Mg(HCO_3)_2 precipitation method.     

催化剂级配技术在加氢改质装置上的工业应用

基于柴油产品质量升级的需求,中国石化大连石油化工研究院(FRIPP)开发了FHIDW加氢改质技术及配套FF-46加氢精制催化剂、FC-14B加氢改质催化剂和FDW-3临氢降凝催化剂.该技术及催化剂级配体系在格尔木炼油厂0.8 Mt·a-1加氢改质装置上的工业应用情况表明,级配催化剂体系对原料适应性强,装置运转平稳,操作灵活性高,催化剂失活速率慢,产品分布合理且质量优异,在降低柴油产品凝点的同时可以明显改善其密度和十六烷值,解决了改造前装置生产重柴油密度偏低的问题,为炼油厂生产符合国V质量标准的柴油提供了技术保障.     

CaDHN3, a Pepper (Capsicum annuum L.) Dehydrin Gene Enhances the Tolerance against Salt and Drought Stresses by Reducing ROS Accumulation

Dehydrins (DHNs) play an important role in abiotic stress tolerance in a large number of plants, but very little is known about the function of DHNs in pepper plants. Here, we isolated a Y₁SK₂-type DHN gene “CaDHN3” from pepper. To authenticate the function of CaDHN3 in salt and drought stresses, it was overexpressed in Arabidopsis and silenced in pepper through virus-induced gene silencing (VIGS). Sub-cellular localization showed that CaDHN3 was located in the nucleus and cell membrane. It was found that CaDHN3-overexpressed (OE) in Arabidopsis plants showed salt and drought tolerance phenotypic characteristics, i.e., increased the initial rooting length and germination rate, enhanced chlorophyll content, lowered the relative electrolyte leakage (REL) and malondialdehyde (MDA) content than the wild-type (WT) plants. Moreover, a substantial increase in the activities of antioxidant enzymes; including the superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), and lower hydrogen peroxide (H₂O₂) contents and higher O₂^•− contents in the transgenic Arabidopsis plants. Silencing of CaDHN3 in pepper decreased the salt- and drought-stress tolerance, through a higher REL and MDA content, and there was more accumulation of reactive oxygen species (ROS) in the CaDHN3-silenced pepper plants than the control plants. Based on the yeast two-hybrid (Y2H) screening and Bimolecular Fluorescence Complementation (BiFC) results, we found that CaDHN3 interacts with CaHIRD11 protein in the plasma membrane. Correspondingly, the expressions of four osmotic-related genes were significantly up-regulated in the CaDHN3-overexpressed lines. In brief, our results manifested that CaDHN3 may play an important role in regulating the relative osmotic stress responses in plants through the ROS signaling pathway. The results of this study will provide a basis for further analyses of the function of DHN genes in pepper.     

The Emerging Clinical Role of Spermine in Prostate Cancer

Spermine, a member of polyamines, exists in all organisms and is essential for normal cell growth and function. It is highly expressed in the prostate compared with other organs and is detectable in urine, tissue, expressed prostatic secretions, and erythrocyte. A significant reduction of spermine level was observed in prostate cancer (PCa) tissue compared with benign prostate tissue, and the level of urinary spermine was also significantly lower in men with PCa. Decreased spermine level may be used as an indicator of malignant phenotype transformation from normal to malignant tissue in prostate. Studies targeting polyamines and key rate-limiting enzymes associated with spermine metabolism as a tool for PCa therapy and chemoprevention have been conducted with various polyamine biosynthesis inhibitors and polyamine analogues. The mechanism between spermine and PCa development are possibly related to the regulation of polyamine metabolism, cancer-driving pathways, oxidative stress, anticancer immunosurveillance, and apoptosis regulation. Although the specific mechanism of spermine in PCa development is still unclear, ongoing research in spermine metabolism and its association with PCa pathophysiology opens up new opportunities in the diagnostic and therapeutic roles of spermine in PCa management.     

Greatly improved NIR shielding performance of CuS nanocrystals by gallium doping for energy efficient window

In this work, gallium doped copper sulfide (Ga-doped CuS) nanocrystals were prepared using a solvothermal method. The effects of Ga doping on the crystal structures, chemical composition, morphology, optical properties and thermal performance of copper sulfide (CuS) were investigated. The Ga-doped CuS nanocrystals had a hexagonal structure comparable to that of pure CuS. The Cu⁺/Cu²⁺ ratio first decreased and then increased with increasing Ga³⁺ doping. Both CuS and Ga-doped CuS exhibited nanoplate and nanorod morphologies. The visible transmittance of the Ga-doped CuS films was in the range of 61–77.1%. Importantly, the near-infrared (NIR) shielding performance of the films can be tuned by adjusting the concentration of the Ga dopant. The NIR shielding value of the optimal Ga-doped CuS film was 72.4%, which was approximately 1.5 times as high as that of the pure CuS film. This can be ascribed to the enhanced plasmonic NIR absorption that resulted from an increase in the hole concentration after doping with Ga³⁺ ions. In the thermal performance test, the Ga-doped CuS film lowered the interior temperature of the heat box by 9.1 °C. Therefore, the integration of good visible transmittance and high NIR shielding performance make the Ga-doped CuS nanocrystals a promising candidate for energy-efficient window coatings.     

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

The design of an interfacial structure is particularly important for load transfer in composites. In this paper, different amounts of carbon nanotubes (CNTs) were grafted onto the carbon fiber (CF) surface by adjusting grown temperature using injection chemical vapor deposition (ICVD). The prepared CF preform grafted with CNTs (CNTs-CF) were used to reinforce magnesium alloy by squeeze casting process. The microstructures were analyzed by means of optical microscope (OM) and scanning electron microscope (SEM), and the interlaminar shear strength (ILSS) and tensile strength of the composites were determined by double-notch shear test and tensile test. The results indicated that moderate ILSS was more conducive to improving the tensile properties of carbon fiber reinforced magnesium matrix (C_f/Mg) composites. Compared with C_f/Mg, the tensile strength of composite with CNTs increased by about 80%. For C_f/Mg composites grafted with CNTs, CNTs had the effects of delaying crack propagation and increasing energy consumption by the pull-out and bridging mechanism, which were the main reasons for improving the strength. The analysis of shear fracture surface showed that the crack propagation path can be optimized by adjusting the amounts of grafted CNTs. The presence of CNTs affects the stress distribution and consequently the crack initiation as well as the crack propagation.     

SBS Thermoplastic Elastomer Based on Dynamic Metal-Ligand Bond: Structure,Mechanical Properties,and Shape Memory Behavior

A Cooper(II) (Cu²⁺)-nitrogen coordination-crosslinked network is designed in poly(styrene-co-butadiene-co-styrene) (SBS) to change commercial elastomers into advanced soft materials. Herein, ligand groups into SBS molecular chains by the 3,6-di(2-pyridyl)-1,2,4,5-tetrazine (DPT) click reaction are first introduced. The results from fourier transform infrared (FT-IR), 1H-nuclear magnetic resonance, and X-ray photoelectron spectroscopy (XPS) are verified the successful modification of SBS. The DPT-grafted SBS could then coordinate with copper sulfate (CuSO₄) to form a Cu²⁺-nitrogen bond, which is further characterized using FT-IR, XPS, atomic force microscope, scanning electron microscope, and geometric structure calculations. After modifying SBS to form an SBS-DPT/CuSO₄ composite (SBS-DPT2-Cu10), the tensile stress is improved from 11.43 to 23.25 MPa, while the elongation at break is remained almost unchanged, and the corresponding toughness is increased from 33.21 to 63.26 MJ m^–3. Moreover, the dynamic nature of the Cu²⁺-nitrogen coordination bonds enables the SBS-DPT/CuSO₄ composite to exhibit sustained thermoplastic performance and excellent shape memory behavior under an external thermal stimulus.